# TP-Link Smart Home Binding

This binding adds support to control TP-Link Smart Home Devices from your local openHAB system.

# Supported Things

The following TP-Link Smart Devices are supported:

# KB100 Kasa Smart Light Bulb

• Switch On/Off
• Adjust the brightness
• Actual power usage
• Wi-Fi signal strength (rssi)

Switching and Brightness is done using the brightness channel.

# KB130 Kasa Multi-color Smart Light Bulb

• Switch On/Off
• Fine-tune colors
• Adjust light appearance from soft white (2500k) to daylight (9000k)
• Adjust the brightness
• Actual power usage
• Wi-Fi signal strength (rssi)

Switching, Brightness and Color is done using the color channel.

# KP100 Kasa Wi-Fi Smart Plug - Slim Edition

• Switch On/Off
• Wi-Fi signal strength (rssi)

# LB100 Smart Wi-Fi LED Bulb with Dimmable Light

• Switch On/Off
• Adjust the brightness
• Actual power usage
• Wi-Fi signal strength (rssi)

Switching and Brightness is done using the brightness channel.

# LB110 Smart Wi-Fi LED Bulb with Dimmable Light

• Switch On/Off
• Adjust the brightness
• Actual power usage
• Wi-Fi signal strength (rssi)

Switching and Brightness is done using the brightness channel.

# LB120 Smart Wi-Fi LED Bulb with Tunable White Light

• Switch On/Off
• Adjust light appearance from soft white (2700k) to daylight (6500k)
• Adjust the brightness
• Actual power usage
• Wi-Fi signal strength (rssi)

Switching and Brightness is done using the brightness channel.

# LB130 Smart Wi-Fi LED Bulb with Color Changing Hue

• Switch On/Off
• Fine-tune colors
• Adjust light appearance from soft white (2500k) to daylight (9000k)
• Adjust the brightness
• Actual power usage
• Wi-Fi signal strength (rssi)

Switching, Brightness and Color is done using the color channel.

# LB200 Smart Wi-Fi LED Bulb with Dimmable Light

• Switch On/Off
• Adjust the brightness
• Actual power usage
• Wi-Fi signal strength (rssi)

Switching and Brightness is done using the brightness channel.

# LB230 Smart Wi-Fi LED Bulb with Color Changing Hue

• Switch On/Off
• Fine-tune colors
• Adjust light appearance from soft white (2500k) to daylight (9000k)
• Adjust the brightness
• Actual power usage
• Wi-Fi signal strength (rssi)

Switching, Brightness and Color is done using the color channel.

# HS100 Smart Wi-Fi Plug

• Switch On/Off
• Wi-Fi signal strength (rssi)

# HS105 Smart Wi-Fi Plug

• Switch On/Off
• Wi-Fi signal strength (rssi)

# HS110 Smart Wi-Fi Plug

• Switch On/Off
• Energy readings
• Wi-Fi signal strength (rssi)

# HS200 Smart Wi-Fi Switch

• Switch On/Off
• Wi-Fi signal strength (rssi)

# HS210 Smart Wi-Fi Light Switch 3-Way Kit

• Switch On/Off
• Wi-Fi signal strength (rssi)

# HS220 Smart Wi-Fi Light Switch, Dimmer

• Switch On/Off
• Brightness
• Wi-Fi signal strength (rssi)

The default refresh is set to 1 second. So it polls the switch for status changes. If you don't use the switch manually often, you can set it to a higher refresh. The refresh is only relevant to detect manual using the switch. Switching via openHAB activates the switch directly.

# RE270K AC750 Wi-Fi Range Extender with Smart Plug

• Switch On/Off
• Wi-Fi signal strength (rssi)

# RE370K AC1200 Wi-Fi Range Extender with Smart Plug

• Switch On/Off
• Wi-Fi signal strength (rssi)

# Prerequisites

Before using Smart Plugs with openHAB the devices must be connected to the Wi-Fi network. This can be done using the TP-Link provided mobile app Kasa.

# Discovery

Devices can be auto discovered in the same local network as the openHAB application. It's possible to connect to devices on a different network, but these must be added manually by ipAddress. It's not possible to connect to devices on a different network using deviceId as configuration.

# Thing Configuration

The thingId is the product type in lower case. For example HS100 has thingId hs100.

The thing can be configured by ipAddress or by deviceId. If the one of them is used the other is automatically set by the binding. When manually configured it's preferred to set the deviceId because if the ip address of the device would change this will be automatically updated. Using a configuration with deviceId depends on the discovery service of the binding. The binding supports background discovery and this will update the ip address in case it changes within a minute. With background discovery disabled the ip address, which is needed to communicate with the device, needs to be set by starting a manual discovery. It won't update the ip address if background discovery is disabled and the ip address of the device changes. Manually starting a discovery can also be used to set the ip address directly instead of waiting for the 1 minute background discovery refresh period.

The thing has the following configuration parameters:

Either deviceId or ipAddress must be set.

# Channels

All devices support some of the following channels:

# Full Example

# tplinksmarthome.things:

tplinksmarthome:hs100:home "Living Room"        [ deviceId="00000000000000000000000000000001", refresh=60 ]
tplinksmarthome:lb110:home "Living Room Bulb 1" [ deviceId="00000000000000000000000000000002", refresh=60, transitionPeriod=2500 ]
tplinksmarthome:lb130:home "Living Room Bulb 2" [ deviceId="00000000000000000000000000000003", refresh=60, transitionPeriod=2500 ]

# tplinksmarthome.items:

Switch   TP_L_Switch  "Switch"                             { channel="tplinksmarthome:hs100:home:switch" }
Number   TP_L_RSSI    "Signal [%d] dB"            <signal> { channel="tplinksmarthome:hs100:home:rssi" }
Dimmer   TP_LB_Bulb   "Dimmer [%d %%]"            <slider> { channel="tplinksmarthome:lb110:home:brightness" }
Dimmer   TP_LB_ColorT "Color Temperature [%d] %%" <slider> { channel="tplinksmarthome:lb130:home:colorTemperature" }
Color    TP_LB_Color  "Color"                     <slider> { channel="tplinksmarthome:lb130:home:color" }
Switch   TP_LB_ColorS "Switch"                             { channel="tplinksmarthome:lb130:home:color" }