This page is part of archived documentation for openHAB 2.5. Go to the current stable version
# Netatmo Binding
The Netatmo binding integrates the following Netatmo products:
- Personal Weather Station. Reports temperature, humidity, air pressure, carbon dioxide concentration in the air, as well as the ambient noise level.
- Thermostat. Reports ambient temperature, allow to check target temperature, consult and change furnace heating status.
- Indoor Camera / Welcome. Reports last event and persons at home, consult picture and video from event/camera.
- Outdoor Camera / Presence. Reports last event, consult picture and video from event/camera.
See http://www.netatmo.com/ (opens new window) for details on their product.
# Binding Configuration
The binding has the following configuration options:
| Parameter | Name | Description |
|---|---|---|
| backgroundDiscovery | Background Discovery | If set to true, the device and its associated modules are updated in the discovery inbox at each API call run to refresh device data. Default is false. |
Before setting up your 'Things', you will have to grant openHAB to access Netatmo API. Here is the procedure:
# 1. Application Creation
Create an application at https://dev.netatmo.com/dev/createapp (opens new window)
The variables you will need to get to setup the binding are:
<CLIENT_ID>Your client ID taken from your App at https://dev.netatmo.com/dev/listapps (opens new window)<CLIENT_SECRET>A token provided along with the<CLIENT_ID>.<USERNAME>The username you use to connect to the Netatmo API (usually your mail address).<PASSWORD>The password attached to the above username.
# 2. Bridge and Things Configuration
Once you will get needed informations from the Netatmo API, you will be able to configure bridge and things.
E.g.
Bridge netatmo:netatmoapi:home [ clientId="<CLIENT_ID>", clientSecret="<CLIENT_SECRET>", username = "<USERNAME>", password = "<PASSWORD>", readStation=true|false, readHealthyHomeCoach=true|false, readThermostat=true|false, readWelcome=true|false, readPresence=true|false] {
Thing NAMain inside [ id="aa:aa:aa:aa:aa:aa" ]
Thing NAModule1 outside [ id="yy:yy:yy:yy:yy:yy", parentId="aa:aa:aa:aa:aa:aa" ]
Thing NHC homecoach [ id="cc:cc:cc:cc:cc:cc", [refreshInterval=60000] ]
Thing NAPlug plugtherm [ id="bb:bb:bb:bb:bb:bb", [refreshInterval=60000] ]
Thing NATherm1 thermostat [ id="xx:xx:xx:xx:xx:xx", parentId="bb:bb:bb:bb:bb:bb" ]
Thing NAWelcomeHome home [ id="58yyacaaexxxebca99x999x", refreshInterval=600000 ]
Thing NACamera camera [ id="cc:cc:cc:cc:cc:cc", parentId="58yyacaaexxxebca99x999x" ]
Thing NOC presenceOutdoorCamera [ id="dd:dd:dd:dd:dd:dd", parentId="58yyacaaexxxebca99x999x" ]
Thing NAWelcomePerson sysadmin [ id="aaaaaaaa-bbbb-cccc-eeee-zzzzzzzzzzzz", parentId="58yyacaaexxxebca99x999x" ]
...
}
# Webhook
For Welcome or Presence Camera, Netatmo servers can send push notifications to the Netatmo Binding by using a callback URL. The webhook URL is setup at bridge level using "Webhook Address" parameter. You will define here public way to access your openHAB server:
http(s)://xx.yy.zz.ww:8080
Your Netatmo App will be configured automatically by the bridge to the endpoint :
http(s)://xx.yy.zz.ww:8080/netatmo/%id%/camera
where %id% is the id of your camera thing.
Please be aware of Netatmo own limits regarding webhook usage that lead to a 24h ban-time when webhook does not answer 5 times.
# Configure Things
The IDs for the modules can be extracted from the developer documentation on the netatmo site.
First login with your user.
Then some examples of the documentation contain the real results of your weather station.
In order to try the examples, you need the device_id of your Netatmo station.
You can find it in the configuration menu of the app (android or apple).
Get the IDs of your devices (indoor, outdoor, rain gauge)
here (opens new window).
main_device is the ID of the "main device", the indoor sensor.
This is equal to the MAC address of the Netatmo.
The other modules you can recognize by "module_name" and then note the "_id" which you need later.
Another way to get the IDs is to calculate them:
You have to calculate the ID for the outside module as follows: (it cannot be read from the app)
- if the first serial character is "h": start with "02"
- if the first serial character is "i": start with "03"
append ":00:00:",
split the rest into three parts of two characters and append with a colon as delimiter.
For example your serial number "h00bcdc" should end up as "02:00:00:00:bc:dc".
# Discovery
If you did not manually create things in the *.things file, the Netatmo Binding is able to discover automatically all depending modules and devices from Netatmo website.
# Channels
# Weather Station Main Indoor Device
Weather station does not need any refreshInterval setting. Based on a standard update period of 10mn by Netatmo systems - it will auto adapt to stick closest as possible to last data availability.
Example item for the indoor module:
Number Netatmo_Indoor_CO2 "CO2" <carbondioxide> { channel = "netatmo:NAMain:home:inside:Co2" }
Supported channels for the main indoor module:
| Channel ID | Item Type | Description |
|---|---|---|
| Co2 | Number:Dimensionless | Air quality |
| MinCo2 | Number:Dimensionless | Minimum CO2 on current day |
| MinCo2ThisWeek | Number:Dimensionless | Minimum CO2 this week |
| MinCo2ThisMonth | Number:Dimensionless | Minimum CO2 this month |
| MaxCo2 | Number:Dimensionless | Maximum CO2 on current day |
| MaxCo2ThisWeek | Number:Dimensionless | Maximum CO2 this week |
| MaxCo2ThisMonth | Number:Dimensionless | Maximum CO2 this month |
| DateMinCo2 | DateTime | Date when minimum CO2 was reached on current day |
| DateMinCo2ThisWeek | DateTime | Date when minimum CO2 was reached this week |
| DateMinCo2ThisMonth | DateTime | Date when minimum CO2 was reached this month |
| DateMaxCo2 | DateTime | Date when maximum CO2 was reached on current day |
| DateMaxCo2ThisWeek | DateTime | Date when maximum CO2 was reached this week |
| DateMaxCo2ThisMonth | DateTime | Date when maximum CO2 was reached this month |
| Temperature | Number:Temperature | Current temperature |
| TempTrend | String | Temperature evolution trend (up, down, stable) |
| Noise | Number:Dimensionless | Current noise level |
| MinNoise | Number:Dimensionless | Minimum noise on current day |
| MinNoiseThisWeek | Number:Dimensionless | Minimum noise this week |
| MinNoiseThisMonth | Number:Dimensionless | Minimum noise this month |
| MaxNoise | Number:Dimensionless | Maximum noise on current day |
| MaxNoiseThisWeek | Number:Dimensionless | Maximum noise this week |
| MaxNoiseThisMonth | Number:Dimensionless | Maximum noise this month |
| DateMinNoise | DateTime | Date when minimum noise was reached on current day |
| DateMinNoiseThisWeek | DateTime | Date when minimum noise was reached this week |
| DateMinNoiseThisMonth | DateTime | Date when minimum noise was reached this month |
| DateMaxNoise | DateTime | Date when maximum noise was reached on current day |
| DateMaxNoiseThisWeek | DateTime | Date when maximum noise was reached this week |
| DateMaxNoiseThisMonth | DateTime | Date when maximum noise was reached this month |
| Pressure | Number:Pressure | Current pressure |
| MinPressure | Number:Pressure | Minimum pressure on current day |
| MinPressureThisWeek | Number:Pressure | Minimum pressure this week |
| MinPressureThisMonth | Number:Pressure | Minimum pressure this month |
| MaxPressure | Number:Pressure | Maximum pressure on current day |
| MaxPressureThisWeek | Number:Pressure | Maximum pressure this week |
| MaxPressureThisMonth | Number:Pressure | Maximum pressure this month |
| DateMinPressure | DateTime | Date when minimum pressure was reached on current day |
| DateMinPressureThisWeek | DateTime | Date when minimum pressure was reached this week |
| DateMinPressureThisMonth | DateTime | Date when minimum pressure was reached this month |
| DateMaxPressure | DateTime | Date when maximum pressure was reached on current day |
| DateMaxPressureThisWeek | DateTime | Date when maximum pressure was reached this week |
| DateMaxPressureThisMonth | DateTime | Date when maximum pressure was reached this month |
| PressTrend | String | Pressure evolution trend for last 12h (up, down, stable) |
| AbsolutePressure | Number:Pressure | Absolute pressure |
| Humidity | Number:Dimensionless | Current humidity |
| MinHumidity | Number:Dimensionless | Minimum humidity on current day |
| MinHumidityThisWeek | Number:Dimensionless | Minimum humidity this week |
| MinHumidityThisMonth | Number:Dimensionless | Minimum humidity this month |
| MaxHumidity | Number:Dimensionless | Maximum humidity on current day |
| MaxHumidityThisWeek | Number:Dimensionless | Maximum humidity this week |
| MaxHumidityThisMonth | Number:Dimensionless | Maximum humidity this month |
| DateMinHumidity | DateTime | Date when minimum humidity was reached on current day |
| DateMinHumidityThisWeek | DateTime | Date when minimum humidity was reached this week |
| DateMinHumidityThisMonth | DateTime | Date when minimum humidity was reached this month |
| DateMaxHumidity | DateTime | Date when maximum humidity was reached on current day |
| DateMaxHumidityThisWeek | DateTime | Date when maximum humidity was reached this week |
| DateMaxHumidityThisMonth | DateTime | Date when maximum humidity was reached this month |
| Humidex | Number | Computed Humidex index |
| HeatIndex | Number:Temperature | Computed Heat Index |
| Dewpoint | Number:Temperature | Computed dewpoint temperature |
| DewpointDepression | Number:Temperature | Computed dewpoint depression |
| MinTemp | Number:Temperature | Minimum temperature on current day |
| MinTempThisWeek | Number:Temperature | Minimum temperature this week |
| MinTempThisMonth | Number:Temperature | Minimum temperature this month |
| MaxTemp | Number:Temperature | Maximum temperature on current day |
| MaxTempThisWeek | Number:Temperature | Maximum temperature this week |
| MaxTempThisMonth | Number:Temperature | Maximum temperature this month |
| DateMinTemp | DateTime | Date when minimum temperature was reached on current day |
| DateMinTempThisWeek | DateTime | Date when minimum temperature was reached this week |
| DateMinTempThisMonth | DateTime | Date when minimum temperature was reached this month |
| DateMaxTemp | DateTime | Date when maximum temperature was reached on current day |
| DateMaxTempThisWeek | DateTime | Date when maximum temperature was reached this week |
| DateMaxTempThisMonth | DateTime | Date when maximum temperature was reached this month |
| DateMinTemp | DateTime | Date when minimum temperature was reached on current day |
| DateMaxTemp | DateTime | Date when maximum temperature was reached on current day |
| TimeStamp | DateTime | Timestamp when data was measured |
| LastStatusStore | DateTime | Last status store |
| WifiStatus | Number | Signal strength (0 for no signal, 1 for weak, 2 for average, 3 for good or 4 for excellent) |
| Location | Location | Location of the device |
All these channels are read only.
# Weather Station Outdoor module
Example item for the outdoor module
Number Netatmo_Outdoor_Temperature "Temperature" { channel = "netatmo:NAModule1:home:outside:Temperature" }
Supported channels for the outdoor module:
| Channel ID | Item Type | Description |
|---|---|---|
| Temperature | Number:Temperature | Current temperature |
| TempTrend | String | Temperature evolution trend (up, down, stable) |
| Humidity | Number:Dimensionless | Current humidity |
| MinHumidity | Number:Dimensionless | Minimum humidity on current day |
| MinHumidityThisWeek | Number:Dimensionless | Minimum humidity this week |
| MinHumidityThisMonth | Number:Dimensionless | Minimum humidity this month |
| MaxHumidity | Number:Dimensionless | Maximum humidity on current day |
| MaxHumidityThisWeek | Number:Dimensionless | Maximum humidity this week |
| MaxHumidityThisMonth | Number:Dimensionless | Maximum humidity this month |
| DateMinHumidity | DateTime | Date when minimum humidity was reached on current day |
| DateMinHumidityThisWeek | DateTime | Date when minimum humidity was reached this week |
| DateMinHumidityThisMonth | DateTime | Date when minimum humidity was reached this month |
| DateMaxHumidity | DateTime | Date when maximum humidity was reached on current day |
| DateMaxHumidityThisWeek | DateTime | Date when maximum humidity was reached this week |
| DateMaxHumidityThisMonth | DateTime | Date when maximum humidity was reached this month |
| Humidex | Number | Computed Humidex index |
| HeatIndex | Number:Temperature | Computed Heat Index |
| Dewpoint | Number:Temperature | Computed dewpoint temperature |
| DewpointDepression | Number:Temperature | Computed dewpoint depression |
| MinTemp | Number:Temperature | Minimum temperature on current day |
| MinTempThisWeek | Number:Temperature | Minimum temperature this week |
| MinTempThisMonth | Number:Temperature | Minimum temperature this month |
| MaxTemp | Number:Temperature | Maximum temperature on current day |
| MaxTempThisWeek | Number:Temperature | Maximum temperature this week |
| MaxTempThisMonth | Number:Temperature | Maximum temperature this month |
| DateMinTemp | DateTime | Date when minimum temperature was reached on current day |
| DateMinTempThisWeek | DateTime | Date when minimum temperature was reached this week |
| DateMinTempThisMonth | DateTime | Date when minimum temperature was reached this month |
| DateMaxTemp | DateTime | Date when maximum temperature was reached on current day |
| DateMaxTempThisWeek | DateTime | Date when maximum temperature was reached this week |
| DateMaxTempThisMonth | DateTime | Date when maximum temperature was reached this month |
| TimeStamp | DateTime | Timestamp when data was measured |
| LastMessage | DateTime | Last message emitted by the module |
| LowBattery | Switch | Low battery |
| BatteryVP | Number | Battery level |
| RfStatus | Number | Signal strength (0 for no signal, 1 for weak, 2 for average, 3 for good or 4 for excellent) |
All these channels are read only.
# Weather Station Additional Indoor module
Example item for the indoor module
Number Netatmo_Indoor2_Temperature "Temperature" { channel = "netatmo:NAModule4:home:insidesupp:Temperature" }
Supported channels for the additional indoor module:
| Channel ID | Item Type | Description |
|---|---|---|
| Co2 | Number:Dimensionless | Air quality |
| MinCo2 | Number:Dimensionless | Minimum CO2 on current day |
| MinCo2ThisWeek | Number:Dimensionless | Minimum CO2 this week |
| MinCo2ThisMonth | Number:Dimensionless | Minimum CO2 this month |
| MaxCo2 | Number:Dimensionless | Maximum CO2 on current day |
| MaxCo2ThisWeek | Number:Dimensionless | Maximum CO2 this week |
| MaxCo2ThisMonth | Number:Dimensionless | Maximum CO2 this month |
| DateMinCo2 | DateTime | Date when minimum CO2 was reached on current day |
| DateMinCo2ThisWeek | DateTime | Date when minimum CO2 was reached this week |
| DateMinCo2ThisMonth | DateTime | Date when minimum CO2 was reached this month |
| DateMaxCo2 | DateTime | Date when maximum CO2 was reached on current day |
| DateMaxCo2ThisWeek | DateTime | Date when maximum CO2 was reached this week |
| DateMaxCo2ThisMonth | DateTime | Date when maximum CO2 was reached this month |
| Temperature | Number:Temperature | Current temperature |
| TempTrend | String | Temperature evolution trend (up, down, stable) |
| Humidity | Number:Dimensionless | Current humidity |
| MinHumidity | Number:Dimensionless | Minimum humidity on current day |
| MinHumidityThisWeek | Number:Dimensionless | Minimum humidity this week |
| MinHumidityThisMonth | Number:Dimensionless | Minimum humidity this month |
| MaxHumidity | Number:Dimensionless | Maximum humidity on current day |
| MaxHumidityThisWeek | Number:Dimensionless | Maximum humidity this week |
| MaxHumidityThisMonth | Number:Dimensionless | Maximum humidity this month |
| DateMinHumidity | DateTime | Date when minimum humidity was reached on current day |
| DateMinHumidityThisWeek | DateTime | Date when minimum humidity was reached this week |
| DateMinHumidityThisMonth | DateTime | Date when minimum humidity was reached this month |
| DateMaxHumidity | DateTime | Date when maximum humidity was reached on current day |
| DateMaxHumidityThisWeek | DateTime | Date when maximum humidity was reached this week |
| DateMaxHumidityThisMonth | DateTime | Date when maximum humidity was reached this month |
| Humidex | Number | Computed Humidex index |
| HeatIndex | Number:Temperature | Computed Heat Index |
| Dewpoint | Number:Temperature | Computed dewpoint temperature |
| DewpointDepression | Number:Temperature | Computed dewpoint depression |
| MinTemp | Number:Temperature | Minimum temperature on current day |
| MinTempThisWeek | Number:Temperature | Minimum temperature this week |
| MinTempThisMonth | Number:Temperature | Minimum temperature this month |
| MaxTemp | Number:Temperature | Maximum temperature on current day |
| MaxTempThisWeek | Number:Temperature | Maximum temperature this week |
| MaxTempThisMonth | Number:Temperature | Maximum temperature this month |
| DateMinTemp | DateTime | Date when minimum temperature was reached on current day |
| DateMinTempThisWeek | DateTime | Date when minimum temperature was reached this week |
| DateMinTempThisMonth | DateTime | Date when minimum temperature was reached this month |
| DateMaxTemp | DateTime | Date when maximum temperature was reached on current day |
| DateMaxTempThisWeek | DateTime | Date when maximum temperature was reached this week |
| DateMaxTempThisMonth | DateTime | Date when maximum temperature was reached this month |
| TimeStamp | DateTime | Timestamp when data was measured |
| LastMessage | DateTime | Last message emitted by the module |
| LowBattery | Switch | Low battery |
| BatteryVP | Number | Battery level |
| RfStatus | Number | Signal strength (0 for no signal, 1 for weak, 2 for average, 3 for good or 4 for excellent) |
All these channels are read only.
# Rain Gauge
Example item for the rain gauge
Number Netatmo_Rain_Current "Rain [%.1f mm]" { channel = "netatmo:NAModule3:home:rain:Rain" }
Supported channels for the rain guage:
| Channel ID | Item Type | Description |
|---|---|---|
| Rain | Number:Length | Quantity of water |
| SumRain1 | Number:Length | Quantity of water on last hour |
| SumRain24 | Number:Length | Quantity of water on last day |
| SumRainThisWeek | Number:Length | Quantity of water this week |
| SumRainThisMonth | Number:Length | Quantity of water this month |
| TimeStamp | DateTime | Timestamp when data was measured |
| LastMessage | DateTime | Last message emitted by the module |
| LowBattery | Switch | Low battery |
| BatteryVP | Number | Battery level |
| RfStatus | Number | Signal strength (0 for no signal, 1 for weak, 2 for average, 3 for good or 4 for excellent) |
All these channels are read only.
# Weather Station Wind module
Example item for the wind module:
Number Netatmo_Wind_Strength "Wind Strength [%.0f KPH]" { channel = "netatmo:NAModule2:home:wind:WindStrength" }
Supported channels for the wind module:
| Channel ID | Item Type | Description |
|---|---|---|
| WindAngle | Number:Angle | Current 5 minutes average wind direction |
| WindStrength | Number:Speed | Current 5 minutes average wind speed |
| GustAngle | Number:Angle | Direction of the last 5 minutes highest gust wind |
| GustStrength | Number:Speed | Speed of the last 5 minutes highest gust wind |
| TimeStamp | DateTime | Timestamp when data was measured |
| LastMessage | DateTime | Last message emitted by the module |
| LowBattery | Switch | Low battery |
| BatteryVP | Number | Battery level |
| RfStatus | Number | Signal strength (0 for no signal, 1 for weak, 2 for average, 3 for good or 4 for excellent) |
| MaxWindStrength | Number:Speed | Maximum wind strength recorded |
| DateMaxWindStrength | DateTime | Timestamp when MaxWindStrength was recorded |
All these channels are read only.
# Healthy Home Coach Device
Example item for the Healthy Home Coach:
String Netatmo_LivingRoom_HomeCoach_HealthIndex "Climate" { channel = "netatmo:NHC:home:livingroom:HealthIndex" }
Supported channels for the healthy home coach device:
| Channel ID | Item Type | Description |
|---|---|---|
| HealthIndex | String | Health index (healthy, fine, fair, poor, unhealthy) |
| Co2 | Number:Dimensionless | Air quality |
| Temperature | Number:Temperature | Current temperature |
| TempTrend | String | Temperature evolution trend (up, down, stable) |
| Noise | Number:Dimensionless | Current noise level |
| Pressure | Number:Pressure | Current pressure |
| PressTrend | String | Pressure evolution trend for last 12h (up, down, stable) |
| AbsolutePressure | Number:Pressure | Absolute pressure |
| Humidity | Number:Dimensionless | Current humidity |
| MinTemp | Number:Temperature | Minimum temperature on current day |
| MaxTemp | Number:Temperature | Maximum temperature on current day |
| DateMinTemp | DateTime | Date when minimum temperature was reached on current day |
| DateMaxTemp | DateTime | Date when maximum temperature was reached on current day |
| TimeStamp | DateTime | Timestamp when data was measured |
| LastStatusStore | DateTime | Last status store |
| WifiStatus | Number | Signal strength (0 for no signal, 1 for weak, 2 for average, 3 for good or 4 for excellent) |
| Location | Location | Location of the device |
All these channels are read only.
# Thermostat Relay Device
Supported channels for the thermostat relay device:
| Channel ID | Item Type | Description |
|---|---|---|
| ConnectedBoiler | Switch | Plug connected boiler |
| LastPlugSeen | DateTime | Last plug seen |
| LastBilan | DateTime | Month of the last available thermostat bilan |
| LastStatusStore | DateTime | Last status store |
| WifiStatus | Number | Signal strength (0 for no signal, 1 for weak, 2 for average, 3 for good or 4 for excellent) |
| Location | Location | Location of the device |
All these channels are read only.
# Thermostat Module
Supported channels for the thermostat module:
| Channel ID | Item Type | Description |
|---|---|---|
| Temperature | Number:Temperature | Current temperature |
| Sp_Temperature | Number:Temperature | Thermostat temperature setpoint |
| SetpointMode | String | Chosen setpoint_mode (program, away, hg, manual, off, max) |
| Planning | String | Id of the currently active planning when mode = program |
| ThermRelayCmd | Switch | Indicates whether the furnace is heating or not |
| ThermOrientation | Number | Physical orientation of the thermostat module |
| TimeStamp | DateTime | Timestamp when data was measured |
| SetpointEndTime | DateTime | Thermostat goes back to schedule after that timestamp |
| LastMessage | DateTime | Last message emitted by the module |
| LowBattery | Switch | Low battery |
| BatteryVP | Number | Battery level |
| RfStatus | Number | Signal strength (0 for no signal, 1 for weak, 2 for average, 3 for good or 4 for excellent) |
All these channels except Sp_Temperature, SetpointMode and Planning are read only.
# Welcome Home
All these channels are read only.
Supported channels for the Home thing:
| Channel ID | Item Type | Description |
|---|---|---|
| welcomeHomeCity | String | City of the home |
| welcomeHomeCountry | String | Country of the home |
| welcomeHomeTimezone | String | Timezone of the home |
| welcomeHomePersonCount | Number | Total number of Persons that are at home |
| welcomeHomeUnknownCount | Number | Count how many Unknown Persons are at home |
| welcomeEventType | String | Type of event |
| welcomeEventTime | DateTime | Time of occurrence of event |
| welcomeEventCameraId | String | Camera that detected the event |
| welcomeEventPersonId | String | Id of the person the event is about (if any) |
| welcomeEventSnapshot | Image | picture of the last event, if it applies |
| welcomeEventSnapshotURL | String | if the last event (depending upon event type) in the home lead a snapshot picture, the picture URL will be available here |
| welcomeEventVideoURL | String | if the last event (depending upon event type) in the home lead a snapshot picture, the corresponding video URL will be available here |
| welcomeEventVideoStatus | String | Status of the video (recording, deleted or available) |
| welcomeEventIsArrival | Switch | If person was considered "away" before being seen during this event |
| welcomeEventMessage | String | Message sent by Netatmo corresponding to given event |
| welcomeEventSubType | String | Sub-type of SD and Alim events |
Supported trigger channels for the Home thing:
| Channel Type ID | Options | Description |
|---|---|---|
| cameraEvent | A camera event is triggered with a short delay but without requiring a webhook. The information of the event can get retrieved from the other "welcomeEvent" home thing channels | |
| HUMAN | Triggered when a human (or person) was detected | |
| ANIMAL | Triggered when an animal was detected | |
| MOVEMENT | Triggered when an unspecified movement was detected | |
| VEHICLE | Triggered when a vehicle was detected | |
| welcomeHomeEvent | A welcome home event is triggered directly via a configured webhook | |
| PERSON | Triggered when a concrete person was detected | |
| PERSON_AWAY | Triggered when a concrete person leaves | |
| MOVEMENT | Triggered when a movement was detected | |
| CONNECTION | Triggered when a camera connection gets created | |
| DISCONNECTION | Triggered when a camera connection got lost | |
| ON | Triggered when camera monitoring is switched on | |
| OFF | Triggered when camera monitoring is switched off | |
| BOOT | Triggered when a camera is booting | |
| SD | Triggered when a camera SD card status was changed | |
| ALIM | Triggered when a power supply status was changed | |
| NEW_MODULE | Triggered when a new module was discovered | |
| MODULE_CONNECT | Triggered when a module gets connected | |
| MODULE_DISCONNECT | Triggered when a module gets disconnected | |
| MODULE_LOW_BATTERY | Triggered when the battery of a module gets low | |
| MODULE_END_UPDATE | Triggered when a firmware update of a module is done | |
| TAG_BIG_MOVE | Triggered when a big movement of a tag was detected | |
| TAG_SMALL_MOVE | Triggered when a small movement of a tag was detected | |
| TAG_UNINSTALLED | Triggered when a tag gets uninstalled | |
| TAG_OPEN | Triggered when an open event of a tag was detected |
# Welcome and Presence Camera
Warnings:
- The URL of the live snapshot is a fixed URL so the value of the channel cameraLivePictureUrl / welcomeCameraLivePictureUrl will never be updated once first set by the binding. So to get a refreshed picture, you need to use the refresh parameter in your sitemap image element.
- Some features like the video surveillance are accessed via the local network, so it may be helpful to set a static IP address for the camera within your local network.
Supported channels for the Welcome Camera thing:
| Channel ID | Item Type | Read/Write | Description |
|---|---|---|---|
| welcomeCameraStatus | Switch | Read-write | State of the camera (video surveillance on/off) |
| welcomeCameraSdStatus | Switch | Read-only | State of the SD card |
| welcomeCameraAlimStatus | Switch | Read-only | State of the power connector |
| welcomeCameraIsLocal | Switch | Read-only | indicates whether the camera is on the same network than the openHAB Netatmo Binding |
| welcomeCameraLivePicture | Image | Read-only | Camera Live Snapshot |
| welcomeCameraLivePictureUrl | String | Read-only | Url of the live snapshot for this camera |
| welcomeCameraLiveStreamUrl | String | Read-only | Url of the live stream for this camera |
Supported channels for the Presence Camera thing:
Warnings:
- The floodlight auto-mode (cameraFloodlightAutoMode) isn't updated it is changed by another application. Therefore the binding handles its own state of the auto-mode. This has the advantage that the user can define its own floodlight switch off behaviour.
| Channel ID | Item Type | Read/Write | Description |
|---|---|---|---|
| cameraStatus | Switch | Read-write | State of the camera (video surveillance on/off) |
| cameraSdStatus | Switch | Read-only | State of the SD card |
| cameraAlimStatus | Switch | Read-only | State of the power connector |
| cameraIsLocal | Switch | Read-only | indicates whether the camera is on the same network than the openHAB Netatmo Binding |
| cameraLivePicture | Image | Read-only | Camera Live Snapshot |
| cameraLivePictureUrl | String | Read-only | Url of the live snapshot for this camera |
| cameraLiveStreamUrl | String | Read-only | Url of the live stream for this camera |
| cameraFloodlightAutoMode | Switch | Read-write | When set the floodlight gets switched to auto instead of off |
| cameraFloodlight | Switch | Read-write | Switch for the floodlight |
# Welcome Person
Netatmo API distinguishes two kinds of persons:
- Known persons : have been identified by the camera and you have defined a name for those.
- Unknown persons : identified by the camera, but no name defined.
Person things are automatically created in discovery process for all known persons.
Supported channels for the Person thing:
| Channel ID | Item Type | Description |
|---|---|---|
| welcomePersonLastSeen | DateTime | Time when this person was last seen |
| welcomePersonAtHome | Switch | Indicates if this person is known to be at home or not |
| welcomePersonAvatarUrl | String | URL for the avatar of this person |
| welcomePersonAvatar | Image | Avatar of this person |
| welcomePersonLastEventMessage | String | Last event message from this person |
| welcomePersonLastEventTime | DateTime | Last event message time for this person |
| welcomePersonLastEventUrl | String | URL for the picture of the last event for this person |
| welcomePersonLastEvent | Image | Picture of the last event for this person |
All these channels except welcomePersonAtHome are read only.
# Configuration Examples
# things/netatmo.things
// Bridge configuration:
Bridge netatmo:netatmoapi:home "Netatmo API" [ clientId="*********", clientSecret="**********", username = "[email protected]", password = "******", readStation=true, readThermostat=false] {
// Thing configuration:
Thing NAMain inside "Netatmo Inside" [ id="aa:aa:aa:aa:aa:aa" ]
Thing NAModule1 outside "Netatmo Outside" [ id="bb:bb:bb:bb:bb:bb", parentId="aa:aa:aa:aa:aa:aa" ]
Thing NAModule3 rain "Netatmo Rain" [ id="cc:cc:cc:cc:cc:cc", parentId="aa:aa:aa:aa:aa:aa" ]
}
# items/netatmo.items
# Indoor Module
Number:Temperature Indoor_Temp "Temperature [%.1f %unit%]" <temperature> { channel = "netatmo:NAMain:home:inside:Temperature" }
Number:Temperature Indoor_Min_Temp "Min Temperature Today [%.1f %unit%]" <temperature> { channel = "netatmo:NAMain:home:inside:MinTemp" }
Number:Temperature Indoor_Min_Temp_This_Week "Min Temperature This Week [%.1f %unit%]" <temperature> { channel = "netatmo:NAMain:home:inside:MinTempThisWeek" }
Number:Temperature Indoor_Min_Temp_This_Month "Min Temperature This Month [%.1f %unit%]" <temperature> { channel = "netatmo:NAMain:home:inside:MinTempThisMonth" }
Number:Temperature Indoor_Max_Temp "Max Temperature Today [%.1f %unit%]" <temperature> { channel = "netatmo:NAMain:home:inside:MaxTemp" }
Number:Temperature Indoor_Max_Temp_This_Week "Max Temperature This Week [%.1f %unit%]" <temperature> { channel = "netatmo:NAMain:home:inside:MaxTempThisWeek" }
Number:Temperature Indoor_Max_Temp_This_Month "Max Temperature This Month [%.1f %unit%]" <temperature> { channel = "netatmo:NAMain:home:inside:MaxTempThisMonth" }
DateTime Indoor_Min_Temp_TS "Min Temperature Today [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinTemp" }
DateTime Indoor_Min_Temp_This_Week_TS "Min Temperature This Week [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinTempThisWeek" }
DateTime Indoor_Min_Temp_This_Month_TS "Min Temperature This Month [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinTempThisMonth" }
DateTime Indoor_Max_Temp_TS "Max Temperature Today [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxTemp" }
DateTime Indoor_Max_Temp_This_Week_TS "Max Temperature This Week [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxTempThisWeek" }
DateTime Indoor_Max_Temp_This_Month_TS "Max Temperature This Month [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxTempThisMonth" }
Number:Dimensionless Indoor_Humidity "Humidity [%d %unit%]" <humidity> { channel = "netatmo:NAMain:home:inside:Humidity" }
Number:Dimensionless Indoor_Min_Humidity "Min Humidity Today [%d %unit%]" <humidity> { channel = "netatmo:NAMain:home:inside:MinHumidity" }
Number:Dimensionless Indoor_Min_Humidity_This_Week "Min Humidity This Week [%d %unit%]" <humidity> { channel = "netatmo:NAMain:home:inside:MinHumidityThisWeek" }
Number:Dimensionless Indoor_Min_Humidity_This_Month "Min Humidity This Month [%d %unit%]" <humidity> { channel = "netatmo:NAMain:home:inside:MinHumidityThisMonth" }
Number:Dimensionless Indoor_Max_Humidity "Max Humidity Today [%d %unit%]" <humidity> { channel = "netatmo:NAMain:home:inside:MaxHumidity" }
Number:Dimensionless Indoor_Max_Humidity_This_Week "Max Humidity This Week [%d %unit%]" <humidity> { channel = "netatmo:NAMain:home:inside:MaxHumidityThisWeek" }
Number:Dimensionless Indoor_Max_Humidity_This_Month "Max Humidity This Month [%d %unit%]" <humidity> { channel = "netatmo:NAMain:home:inside:MaxHumidityThisMonth" }
DateTime Indoor_Min_Humidity_TS "Min Humidity Today [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinHumidity" }
DateTime Indoor_Min_Humidity_This_Week_TS "Min Humidity This Week [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinHumidityThisWeek" }
DateTime Indoor_Min_Humidity_This_Month_TS "Min Humidity This Month [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinHumidityThisMonth" }
DateTime Indoor_Max_Humidity_TS "Max Humidity Today [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxHumidity" }
DateTime Indoor_Max_Humidity_This_Week_TS "Max Humidity This Week [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxHumidityThisWeek" }
DateTime Indoor_Max_Humidity_This_Month_TS "Max Humidity This Month [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxHumidityThisMonth" }
Number Indoor_Humidex "Humidex [%.0f]" <temperature_hot> { channel = "netatmo:NAMain:home:inside:Humidex" }
Number:Temperature Indoor_HeatIndex "HeatIndex [%.1f %unit%]" <temperature_hot> { channel = "netatmo:NAMain:home:inside:HeatIndex" }
Number:Temperature Indoor_Dewpoint "Dewpoint [%.1f %unit%]" <temperature_cold> { channel = "netatmo:NAMain:home:inside:Dewpoint" }
Number:Temperature Indoor_DewpointDepression "DewpointDepression [%.1f %unit%]" <temperature_cold> { channel = "netatmo:NAMain:home:inside:DewpointDepression" }
Number:Dimensionless Indoor_Co2 "CO2 [%d %unit%]" <carbondioxide> { channel = "netatmo:NAMain:home:inside:Co2" }
Number:Dimensionless Indoor_Min_Co2 "Min CO2 Today [%.1f %unit%]" <carbondioxide> { channel = "netatmo:NAMain:home:inside:MinCo2" }
Number:Dimensionless Indoor_Min_Co2_This_Week "Min CO2 This Week [%.1f %unit%]" <carbondioxide> { channel = "netatmo:NAMain:home:inside:MinCo2ThisWeek" }
Number:Dimensionless Indoor_Min_Co2_This_Month "Min CO2 This Month [%.1f %unit%]" <carbondioxide> { channel = "netatmo:NAMain:home:inside:MinCo2ThisMonth" }
Number:Dimensionless Indoor_Max_Co2 "Max CO2 Today [%.1f %unit%]" <carbondioxide> { channel = "netatmo:NAMain:home:inside:MaxCo2" }
Number:Dimensionless Indoor_Max_Co2_This_Week "Max CO2 This Week [%.1f %unit%]" <carbondioxide> { channel = "netatmo:NAMain:home:inside:MaxCo2ThisWeek" }
Number:Dimensionless Indoor_Max_Co2_This_Month "Max CO2 This Month [%.1f %unit%]" <carbondioxide> { channel = "netatmo:NAMain:home:inside:MaxCo2ThisMonth" }
DateTime Indoor_Min_Co2_TS "Min CO2 Today [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinCo2" }
DateTime Indoor_Min_Co2_This_Week_TS "Min CO2 This Week [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinCo2ThisWeek" }
DateTime Indoor_Min_Co2_This_Month_TS "Min CO2 This Month [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinCo2ThisMonth" }
DateTime Indoor_Max_Co2_TS "Max CO2 Today [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxCo2" }
DateTime Indoor_Max_Co2_This_Week_TS "Max CO2 This Week [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxCo2ThisWeek" }
DateTime Indoor_Max_Co2_This_Month_TS "Max CO2 This Month [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxCo2ThisMonth" }
Number:Pressure Indoor_Pressure "Pressure [%.1f %unit%]" <pressure> { channel = "netatmo:NAMain:home:inside:Pressure" }
Number:Pressure Indoor_Min_Pressure "Min Pressure Today [%d %unit%]" <pressure> { channel = "netatmo:NAMain:home:inside:MinPressure" }
Number:Pressure Indoor_Min_Pressure_This_Week "Min Pressure This Week [%d %unit%]" <pressure> { channel = "netatmo:NAMain:home:inside:MinPressureThisWeek" }
Number:Pressure Indoor_Min_Pressure_This_Month "Min Pressure This Month [%d %unit%]" <pressure> { channel = "netatmo:NAMain:home:inside:MinPressureThisMonth" }
Number:Pressure Indoor_Max_Pressure "Max Pressure Today [%d %unit%]" <pressure> { channel = "netatmo:NAMain:home:inside:MaxPressure" }
Number:Pressure Indoor_Max_Pressure_This_Week "Max Pressure This Week [%d %unit%]" <pressure> { channel = "netatmo:NAMain:home:inside:MaxPressureThisWeek" }
Number:Pressure Indoor_Max_Pressure_This_Month "Max Pressure This Month [%d %unit%]" <pressure> { channel = "netatmo:NAMain:home:inside:MaxPressureThisMonth" }
DateTime Indoor_Min_Pressure_TS "Min Pressure Today [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinPressure" }
DateTime Indoor_Min_Pressure_This_Week_TS "Min Pressure This Week [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinPressureThisWeek" }
DateTime Indoor_Min_Pressure_This_Month_TS "Min Pressure This Month [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinPressureThisMonth" }
DateTime Indoor_Max_Pressure_TS "Max Pressure Today [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxPressure" }
DateTime Indoor_Max_Pressure_This_Week_TS "Max Pressure This Week [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxPressureThisWeek" }
DateTime Indoor_Max_Pressure_This_Month_TS "Max Pressure This Month [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxPressureThisMonth" }
Number:Pressure Indoor_AbsolutePressure "AbsolutePressure [%.1f %unit%]" <pressure> { channel = "netatmo:NAMain:home:inside:AbsolutePressure" }
Number:Dimensionless Indoor_Noise "Noise [%d %unit%]" <soundvolume> { channel = "netatmo:NAMain:home:inside:Noise" }
Number:Dimensionless Indoor_Min_Noise "Min Noise Today [%.1f %unit%]" <soundvolume> { channel = "netatmo:NAMain:home:inside:MinNoise" }
Number:Dimensionless Indoor_Min_Noise_This_Week "Min Noise This Week [%.1f %unit%]" <soundvolume> { channel = "netatmo:NAMain:home:inside:MinNoiseThisWeek" }
Number:Dimensionless Indoor_Min_Noise_This_Month "Min Noise This Month [%.1f %unit%]" <soundvolume> { channel = "netatmo:NAMain:home:inside:MinNoiseThisMonth" }
Number:Dimensionless Indoor_Max_Noise "Max Noise Today [%.1f %unit%]" <soundvolume> { channel = "netatmo:NAMain:home:inside:MaxNoise" }
Number:Dimensionless Indoor_Max_Noise_This_Week "Max Noise This Week [%.1f %unit%]" <soundvolume> { channel = "netatmo:NAMain:home:inside:MaxNoiseThisWeek" }
Number:Dimensionless Indoor_Max_Noise_This_Month "Max Noise This Month [%.1f %unit%]" <soundvolume> { channel = "netatmo:NAMain:home:inside:MaxNoiseThisMonth" }
DateTime Indoor_Min_Noise_TS "Min Noise Today [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinNoise" }
DateTime Indoor_Min_Noise_This_Week_TS "Min Noise This Week [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinNoiseThisWeek" }
DateTime Indoor_Min_Noise_This_Month_TS "Min Noise This Month [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMinNoiseThisMonth" }
DateTime Indoor_Max_Noise_TS "Max Noise Today [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxNoise" }
DateTime Indoor_Max_Noise_This_Week_TS "Max Noise This Week [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxNoiseThisWeek" }
DateTime Indoor_Max_Noise_This_Month_TS "Max Noise This Month [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:DateMaxNoiseThisMonth" }
Number Indoor_WifiStatus "WifiStatus [%s]" <signal> { channel = "netatmo:NAMain:home:inside:WifiStatus" }
DateTime Indoor_TimeStamp "TimeStamp [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAMain:home:inside:TimeStamp" }
Location Indoor_Location "Location" <movecontrol> { channel = "netatmo:NAMain:home:inside:Location" }
DateTime Indoor_LastStatusStore "LastStatusStore [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <text> { channel = "netatmo:NAMain:home:inside:LastStatusStore" }
# Outdoor Module
Number:Temperature Outdoor_Temperature "Temperature [%.1f %unit%]" <temperature> { channel = "netatmo:NAModule1:home:outside:Temperature" }
String Outdoor_TempTrend "TempTrend [%s]" <line> { channel = "netatmo:NAModule1:home:outside:TempTrend" }
Number:Dimensionless Outdoor_Humidity "Humidity [%d %unit%]" <humidity> { channel = "netatmo:NAModule1:home:outside:Humidity" }
Number Outdoor_Humidex "Humidex [%.0f]" <temperature_hot> { channel = "netatmo:NAModule1:home:outside:Humidex" }
Number:Temperature Outdoor_HeatIndex "HeatIndex [%.1f %unit%]" <temperature_hot> { channel = "netatmo:NAModule1:home:outside:HeatIndex" }
Number:Temperature Outdoor_Dewpoint "Dewpoint [%.1f %unit%]" <temperature_cold> { channel = "netatmo:NAModule1:home:outside:Dewpoint" }
Number:Temperature Outdoor_DewpointDepression "DewpointDepression [%.1f %unit%]" <temperature_cold> { channel = "netatmo:NAModule1:home:outside:DewpointDepression" }
Number Outdoor_RfStatus "RfStatus [%.0f / 5]" <signal> { channel = "netatmo:NAModule1:home:outside:RfStatus" }
Switch Outdoor_LowBattery "LowBattery [%s]" <siren> { channel = "netatmo:NAModule1:home:outside:LowBattery" }
Number Outdoor_BatteryVP "BatteryVP [%.0f %%]" <battery> { channel = "netatmo:NAModule1:home:outside:BatteryVP" }
DateTime Outdoor_TimeStamp "TimeStamp [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <calendar> { channel = "netatmo:NAModule1:home:outside:TimeStamp" }
DateTime Outdoor_LastMessage "LastMessage [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" <text> { channel = "netatmo:NAModule1:home:outside:LastMessage" }
# Rain Module
Number:Length Rain_Hour "Rain Last Hour [%.02f %unit%]" <rain> {channel="netatmo:NAModule3:home:rain:SumRain1"}
Number:Length Rain_Today "Rain Today [%.02f %unit%]" <rain> {channel="netatmo:NAModule3:home:rain:SumRain24"}
Number:Length Rain_Week "Rain This Week [%.02f %unit%]" <rain> {channel="netatmo:NAModule3:home:rain:SumRainThisWeek"}
Number:Length Rain_Month "Rain This Month [%.02f %unit%]" <rain> {channel="netatmo:NAModule3:home:rain:SumRainThisMonth"}
Number Rain_BatteryVP "Rain battery status [%d%%]" <battery> {channel="netatmo:NAModule3:home:rain:BatteryVP"}
# sitemaps/netatmo.sitemap
sitemap netatmo label="Netatmo" {
Frame label="Indoor" {
Text item=Indoor_Temp
Text item=Indoor_Min_Temp
Text item=Indoor_Min_Temp_This_Week
Text item=Indoor_Min_Temp_This_Month
Text item=Indoor_Max_Temp
Text item=Indoor_Max_Temp_This_Week
Text item=Indoor_Max_Temp_This_Month
Text item=Indoor_Min_Temp_TS
Text item=Indoor_Min_Temp_This_Week_TS
Text item=Indoor_Min_Temp_This_Month_TS
Text item=Indoor_Max_Temp_TS
Text item=Indoor_Max_Temp_This_Week_TS
Text item=Indoor_Max_Temp_This_Month_TS
Text item=Indoor_Humidity
Text item=Indoor_Min_Humidity
Text item=Indoor_Min_Humidity_This_Week
Text item=Indoor_Min_Humidity_This_Month
Text item=Indoor_Max_Humidity
Text item=Indoor_Max_Humidity_This_Week
Text item=Indoor_Max_Humidity_This_Month
Text item=Indoor_Min_Humidity_TS
Text item=Indoor_Min_Humidity_This_Week_TS
Text item=Indoor_Min_Humidity_This_Month_TS
Text item=Indoor_Max_Humidity_TS
Text item=Indoor_Max_Humidity_This_Week_TS
Text item=Indoor_Max_Humidity_This_Month_TS
Text item=Indoor_Humidex valuecolor=[<20.1="green",<29.1="blue",<28.1="yellow",<45.1="orange",<54.1="red",>54.1="maroon"]
Text item=Indoor_HeatIndex
Text item=Indoor_Dewpoint
Text item=Indoor_DewpointDepression
Text item=Indoor_Co2 valuecolor=[<800="green",<1000="orange",<1400="red",>1399="maroon"]
Text item=Indoor_Min_Co2 valuecolor=[<800="green",<1000="orange",<1400="red",>1399="maroon"]
Text item=Indoor_Min_Co2_This_Week valuecolor=[<800="green",<1000="orange",<1400="red",>1399="maroon"]
Text item=Indoor_Min_Co2_This_Month valuecolor=[<800="green",<1000="orange",<1400="red",>1399="maroon"]
Text item=Indoor_Max_Co2 valuecolor=[<800="green",<1000="orange",<1400="red",>1399="maroon"]
Text item=Indoor_Max_Co2_This_Week valuecolor=[<800="green",<1000="orange",<1400="red",>1399="maroon"]
Text item=Indoor_Max_Co2_This_Month valuecolor=[<800="green",<1000="orange",<1400="red",>1399="maroon"]
Text item=Indoor_Min_Co2_TS
Text item=Indoor_Min_Co2_This_Week_TS
Text item=Indoor_Min_Co2_This_Month_TS
Text item=Indoor_Max_Co2_TS
Text item=Indoor_Max_Co2_This_Week_TS
Text item=Indoor_Max_Co2_This_Month_TS
Text item=Indoor_Pressure
Text item=Indoor_Min_Pressure
Text item=Indoor_Min_Pressure_This_Week
Text item=Indoor_Min_Pressure_This_Month
Text item=Indoor_Max_Pressure
Text item=Indoor_Max_Pressure_This_Week
Text item=Indoor_Max_Pressure_This_Month
Text item=Indoor_Min_Pressure_TS
Text item=Indoor_Min_Pressure_This_Week_TS
Text item=Indoor_Min_Pressure_This_Month_TS
Text item=Indoor_Max_Pressure_TS
Text item=Indoor_Max_Pressure_This_Week_TS
Text item=Indoor_Max_Pressure_This_Month_TS
Text item=Indoor_AbsolutePressure
Text item=Indoor_Noise
Text item=Indoor_Min_Noise
Text item=Indoor_Min_Noise_This_Week
Text item=Indoor_Min_Noise_This_Month
Text item=Indoor_Max_Noise
Text item=Indoor_Max_Noise_This_Week
Text item=Indoor_Max_Noise_This_Month
Text item=Indoor_Min_Noise_TS
Text item=Indoor_Min_Noise_This_Week_TS
Text item=Indoor_Min_Noise_This_Month_TS
Text item=Indoor_Max_Noise_TS
Text item=Indoor_Max_Noise_This_Week_TS
Text item=Indoor_Max_Noise_This_Month_TS
Text item=Indoor_WifiStatus
Text item=Indoor_TimeStamp
Text item=Indoor_Location
Text item=Indoor_LastStatusStore
}
Frame label="Outdoor" {
Text item=Outdoor_Temperature
Text item=Outdoor_TempTrend
Text item=Outdoor_Humidity
Text item=Outdoor_Humidex valuecolor=[<20.1="green",<29.1="blue",<28.1="yellow",<45.1="orange",<54.1="red",>54.1="maroon"]
Text item=Outdoor_HeatIndex
Text item=Outdoor_Dewpoint
Text item=Outdoor_DewpointDepression
Text item=Outdoor_RfStatus
Text item=Outdoor_LowBattery
Text item=Outdoor_BatteryVP
Text item=Outdoor_TimeStamp
Text item=Outdoor_LastMessage
}
Frame label="Rain" {
Text item=Rain_Hour
Text item=Rain_Today
Text item=Rain_Week
Text item=Rain_Month
Text item=Rain_BatteryVP
}
}
# Sample data
If you want to evaluate this binding but have not got a Netatmo station yourself yet, you can add the Netatmo office in Paris to your account:
# Icons
The following icons are used by original Netatmo web app:
# Modules
- https://my.netatmo.com/images/my/app/module_int.png (opens new window)
- https://my.netatmo.com/images/my/app/module_ext.png (opens new window)
- https://my.netatmo.com/images/my/app/module_rain.png (opens new window)
# Battery status
- https://my.netatmo.com/images/my/app/battery_verylow.png (opens new window)
- https://my.netatmo.com/images/my/app/battery_low.png (opens new window)
- https://my.netatmo.com/images/my/app/battery_medium.png (opens new window)
- https://my.netatmo.com/images/my/app/battery_high.png (opens new window)
- https://my.netatmo.com/images/my/app/battery_full.png (opens new window)
# Signal status
- https://my.netatmo.com/images/my/app/signal_verylow.png (opens new window)
- https://my.netatmo.com/images/my/app/signal_low.png (opens new window)
- https://my.netatmo.com/images/my/app/signal_medium.png (opens new window)
- https://my.netatmo.com/images/my/app/signal_high.png (opens new window)
- https://my.netatmo.com/images/my/app/signal_full.png (opens new window)
# Wifi status
- https://my.netatmo.com/images/my/app/wifi_low.png (opens new window)
- https://my.netatmo.com/images/my/app/wifi_medium.png (opens new window)
- https://my.netatmo.com/images/my/app/wifi_high.png (opens new window)
- https://my.netatmo.com/images/my/app/wifi_full.png (opens new window)
Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)