TRÅDFRI Binding

This binding integrates the IKEA TRÅDFRI gateway and devices connected to it (such as dimmable LED bulbs).

Supported Things

Beside the gateway (thing type "gateway"), the binding currently supports colored bulbs, dimmable warm white bulbs as well as white spectrum bulbs and control outlets. The binding also supports read-only data from remote controls and motion sensors (e.g. the battery status). The TRÅDFRI controller and sensor devices currently cannot be observed right away because they are communicating directly with the bulbs or lamps without routing their commands through the gateway. This makes it nearly impossible to trigger events for pressed buttons. We only can access some static data like the present status or battery level.

The thing type ids are defined according to the lighting devices defined for ZigBee LightLink (see page 24, table 2 (opens new window). These are:

Device type	ZigBee Device ID	Thing type
Dimmable Light	0x0100	0100
Colour Temperature Light	0x0220	0220
Extended Colour Light	0x0210	0210
Occupancy Sensor	0x0107	0107
Non-Colour Controller	0x0820	0820
Non-Colour Scene Controller	0x0830	0830
Control Outlet	0x0010	0010
Window Covering Device	0x0202	0202
Window Covering Controller	0x0202	0203

The following matrix lists the capabilities (channels) for each of the supported lighting device types:

Thing type	Brightness	Color	Color Temperature	Battery Level	Battery Low	Power	Position
0010						X
0100	X
0220	X		X
0210		X	X
0107				X	X
0820				X	X
0830				X	X
0202				X	X		X
0203				X	X

Thing Configuration

For first pairing - the gateway requires a host parameter for the hostname or IP address and a code, which is the security code that is printed on the bottom of the gateway. Optionally, a port can be configured, but any standard gateway uses the default port 5684. The gateway requires at least firmware version 1.2.42 to connect to this binding.

The code is used during the initialization for retrieving unique identity and pre-shared key from the gateway and then it is discarded from the configuration. The newly created authentication data is stored in advanced parameters identity and preSharedKey. On each initialization if the code is present in the thing configuration - the identity and preSharedKey are recreated and the code is again discarded.

The devices require only a single (integer) parameter, which is their instance id. Unfortunately, this is not displayed anywhere in the IKEA app, but it seems that they are sequentially numbered starting with 65537 for the first device. If in doubt, use the auto-discovered things to find out the correct instance ids.

Channels

The dimmable bulbs support the brightness channel. The white spectrum bulbs additionally also support the color_temperature channel.

Full color bulbs support the color_temperature and color channels. Brightness can be changed with the color channel.

The remote control and the motion sensor supports the battery_level and battery_low channels for reading the battery status.

The control outlet supports the power channel.

A blind or curtain supports beside battery_level and battery_low channels a positon channel.

Refer to the matrix above.

Channel Type ID	Item Type	Description
brightness	Dimmer	The brightness of the bulb in percent
color_temperature	Dimmer	color temperature from 0% = cold to 100% = warm
color	Color	full color
battery_level	Number	battery level (in %)
battery_low	Switch	battery low warning (<=10% = ON, >10% = OFF)
power	Switch	power switch
position	Rollershutter	position of the blinds from 0% = open to 100% = closed

Full Example

demo.things:

Bridge tradfri:gateway:mygateway [ host="192.168.0.177", code="EHPW5rIJKyXFgjH3" ] {
    0100 myDimmableBulb "My Dimmable Bulb" [ id=65537 ]    
    0220 myColorTempBulb "My Color Temp Bulb" [ id=65538 ]
    0210 myColorBulb "My Color Bulb" [ id=65539 ]
    0830 myRemoteControl "My Remote Control" [ id=65545 ]
    0010 myControlOutlet "My Control Outlet" [ id=65542 ]
    0202 myBlinds "My Blinds" [ id=65547 ]
}

demo.items:

Dimmer Light1 { channel="tradfri:0100:mygateway:myDimmableBulb:brightness" }
Dimmer Light2_Brightness { channel="tradfri:0220:mygateway:myColorTempBulb:brightness" }
Dimmer Light2_ColorTemperature { channel="tradfri:0220:mygateway:myColorTempBulb:color_temperature" }
Color ColorLight { channel="tradfri:0210:mygateway:myColorBulb:color" }
Number RemoteControlBatteryLevel { channel="tradfri:0830:mygateway:myRemoteControl:battery_level" }
Switch RemoteControlBatteryLow { channel="tradfri:0830:mygateway:myRemoteControl:battery_low" }
Switch ControlOutlet { channel="tradfri:0010:mygateway:myControlOutlet:power" }
Rollershutter BlindPosition { channel="tradfri:0202:mygateway:myBlinds:position" }

demo.sitemap:

sitemap demo label="Main Menu"
{
    Frame {
        Slider item=Light1 label="Light1 Brightness [%.1f %%]"
        Slider item=Light2_Brightness label="Light2 Brightness [%.1f %%]"
        Slider item=Light2_ColorTemperature label="Light2 Color Temperature [%.1f %%]"
        Colorpicker item=ColorLight label="Color"
        Text item=RemoteControlBatteryLevel label="Battery Level [%d %%]"
        Switch item=RemoteControlBatteryLow label="Battery Low Warning"
        Switch item=ControlOutlet label="Power Switch"
        Switch item=BlindPosition label="Blind Position [%d]"
    }
}

• Stable
• Latest

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)